Views: 0 Author: Lucy -MINGHUNG MACHINERY Publish Time: 21-04-2025 Origin: Lucy -MINGHUNG MACHINERY
Do you know what is the Hollow core /Tubular particleboard? This article will tell you
Keywords: #hollowcoreparticleboard #tubularparticleboard
| ◆ | Hollow Core Particleboard Introduction |
√ Mainly Features of Hollow core particle board
1. Structural design
The interior is a honeycomb, tubular or grid-like hollow structure, and the exterior is covered with a relatively thin and dense surface layer of particleboard.
The hollow part usually accounts for 30% to 60% of the volume of the board, significantly reducing the weight.
2. Materials:
The base material is wood shavings or scraps (such as pine, poplar, etc.), similar to ordinary particleboard, but with less glue used.
Moisture-proof agents or flame retardants may be added to meet special requirements.
3. Performance advantages:
Lightweight: 30%-50% lighter than solid particleboard, making it easy to handle and install.
Sound insulation and heat insulation: The hollow structure can effectively reduce the conduction of sound waves and heat transfer.
Low cost: Reduced raw material usage leads to lower production costs.
Environmental friendliness: The amount of glue used is small, and some products meet the E0 or F☆☆☆☆ environmental protection standards.
√ Application
● Furniture manufacturing: It is used for the backboards of cabinets, the bottom boards of drawers, and the core materials of sliding doors that require lightweight.
● Interior decoration: As partition walls, base layers for ceilings, decorative screens, etc.
● Packaging materials: Replace solid wood or thick cardboard to make lightweight packaging boxes.
● Temporary structures: Support structures for short-term use such as exhibition display stands and stage props.
| ◆ | The Difference between Hollow core Particleboard and Standard Particle board？ |
| Item | Hollow-Core Particleboard | Standard Particleboard |
| Weight | Light | Heaavier |
| Strength | low flexural strength and is prone to warping | high compressive and bending strength |
| Soundproofing effectiveness | Good | Common |
| Cost | Lower | Medium |
| Application | Non-load-bearing and light-load environments | Load-bearing furniture, countertops, etc |
| ◆ | Matters need attention |
- Avoid load-bearing: Not suitable for use as bookshelf shelves, tabletops and other parts that need to bear force.
- Moisture-proof treatment: If it is used in a humid environment (such as a bathroom), a moisture-proof type or a waterproof film should be selected on the surface.
- Processing techniques:
The edges are prone to cracking during cutting. It is recommended to use a fine-toothed saw blade.
The grip force of the nails is relatively poor. It is best to use bolts or special hardware at the connection points
We are China factory of Particle board production line and OSB production line and MDF production line, we can offer the suitable machine for you
Welcome contact us
Mark: +86 18769900191
Ali: +86 15805496117
Lucy: +86 18954906501
Email: osbmdfmachinery@gmail.com
