Home
You are here: Home / Products / Continuous Press / Wood Based Panel Production Lines

Wood Based Panel Production Lines

We provide design, complete equipment supply, installation, commissioning and operator training for four major wood-based panel production lines. Each line can be customized to your selected capacity (50,000 / 100,000 / 150,000 / 200,000 / 300,000 / 400,000 / 500,000 m³ per year) and press type — Multi-Opening Hot Press line or Continuous Hot Press line. Capacity tables and section-by-section equipment lists for each production line are given below.
Availability:
  • MINGHUNG

  • MINGHUNG

Wood-Based Panel Production Lines

Particle Board Line · MDF Line · OSB Line · Plywood Line — Complete plant design, equipment supply, installation and turnkey service

50,000–500,000 m³/year Multi-Opening Hot Press Line Continuous Press Line Turnkey Project

We provide design, complete equipment supply, installation, commissioning and operator training for four major wood-based panel production lines. Each line can be customized to your selected capacity (50,000 / 100,000 / 150,000 / 200,000 / 300,000 / 400,000 / 500,000 m³ per year) and press type — Multi-Opening Hot Press line or Continuous Hot Press line. Capacity tables and section-by-section equipment lists for each production line are given below.

General note: Daily output is estimated on 300 working days × 22 hours per day. Equipment configurations shown are typical examples; the final configuration depends on raw material (wood species, moisture content), panel specifications (size, thickness range) and investment budget. Detailed quotations and technical proposals are available on request.

MINGHUNG Particleboard Production Line

1. Particle Board Production Line (PB Line)

Using branches, wood-processing residues and recycled wood as raw material, the line produces particle board through chipping, flake preparation, drying, screening, glue blending, mat forming, hot pressing and post-treatment. Standard panel size 1220 × 2440 mm (4 ft line); wider 8 ft (≥1830 mm) options available. Ideal for furniture, flooring substrates, packaging and construction.


FOSB for MINGHUNG Production Machinery LineOSB PB MDF HDF Produce from MINGHUNG Wood Based Panel Production LineOSB PB MDF HDF LOSB Produce from MINGHUNG Wood Based Panel Production Line

1.1 Capacity Configuration Table

Capacity (m³/yr) Daily Output (approx.) Multi-Opening Hot Press Line · Typical Config. Continuous Press Line · Typical Config.
50,000 167 m³/day 4 ft · 15-daylight multi-opening press 4 ft · continuous press ≈ 24 m
100,000 333 m³/day 4 ft · 20-daylight multi-opening press 4 ft · continuous press ≈ 30 m
150,000 500 m³/day 4 ft · 25-daylight press, or 8 ft · 15-daylight 4 ft · continuous press ≈ 36 m
200,000 667 m³/day 8 ft · 20–25-daylight multi-opening press 4 ft · continuous press ≈ 40 m
300,000 1,000 m³/day Not recommended; continuous line preferred 4 ft · ≈ 45 m high-speed continuous line
400,000 1,333 m³/day Continuous solution recommended Two continuous lines in parallel, or extra-large line
500,000 1,667 m³/day Continuous solution recommended Two large continuous lines in parallel

Heating media: thermal oil, steam or hot water. The continuous press uses steel belts with circulating thermal oil, together with a continuous pre-press, inline weighing and thickness measurement.

Medium Density Board Production Line


1.2 Multi-Opening vs. Continuous Press — Comparison

Item Multi-Opening Hot Press Line Continuous Press Line
Best capacity range 50,000–200,000 m³/yr 100,000–500,000 m³/yr, first choice for high output
Investment Lower; shorter payback Higher; better yield and product economics
Board quality Thickness tolerance ±0.3 mm; possible press marks Thickness tolerance ±0.1–0.15 mm; smooth mark-free surface; more uniform density profile
Raw material use Higher trim/edge losses No caul-plate losses, lower trim loss, higher yield
Flexibility Easy thickness changeover; ideal for many SKUs Thickness adjustable online; ideal for stable mass production
Automation Automatic loading/unloading; batch operation Fully continuous with highest level of inline monitoring

1.3 Equipment List by Section (Multi-Opening / Continuous)

MINGHUNG Chipboard Production Line

Section Multi-Opening Line Continuous Line Function
① Raw material preparation Drum chipper, belt/chain conveyors, metal detector, chip silo, tramp-metal removal Convert raw material into qualified chips, remove metal impurities
② Flake preparation Long-wood flaker (surface flakes), knife-ring flaker (core flakes), hammer mill, wet flake silo Produce thin surface flakes and coarse core flakes
③ Drying Rotor (single-pass) dryer, spark detection & extinguishing system, dry flake silo Dry flakes to process moisture (approx. 3–5%)
④ Screening Swing screen (mechanical), air classifier, oversize re-crushing loop Separate surface/core flakes, reject oversize and fines
⑤ Glue mixing & blending Glue kitchen (metering, dosing, agitators), ring/high-speed blender (surface & core separately) Accurate resin dosing and blending
⑥ Forming Mechanical + pneumatic forming stations, mat conveyor, mat cut-off saw Continuous forming heads (mechanical + pneumatic), inline weighing/scanning Form uniform mat in surface–core–surface structure
⑦ Pre-pressing Mat pre-press (optional) Continuous roller pre-press (standard) Consolidate mat, improve press efficiency
⑧ Hot pressing Multi-opening hot press + automatic loader + unloader Continuous hot press (steel belts, thermal-oil loop, closed-loop thickness control) Cure and set panel thickness and density profile
⑨ Cooling & trimming Star/floor cooler, edge-trimming saws, cut-to-length saw (inline on continuous line) Cool, de-gas and trim panels to size
⑩ Sanding & stacking Wide-belt sander (4-head or more), intermediate bin, automatic stacker, inspection & packing Calibrate and sand surfaces, grade, stack and pack

2. Medium Density Fiberboard (MDF) Production Line

Using branches and thinnings as raw material, the line produces fibers by chipping, washing and thermo-mechanical refining, then dries, blends, forms and presses them into MDF. Its fine surface and excellent machinability make it the preferred substrate for furniture, flooring, door skins, engraving and painting. Board density 0.72–0.85 g/cm³ (high-density HDF option available).

HDF Production Line

Fiber for MDF Line

MDF BOARD

2.1 Capacity Configuration Table

Capacity (m³/yr) Daily Output (approx.) Multi-Opening Hot Press Line · Typical Config. Continuous Press Line · Typical Config.
50,000 167 m³/day 4 ft · 15-daylight press + refiner (approx. 2,100 kW class) 4 ft · continuous press ≈ 24 m
100,000 333 m³/day 4 ft · 20-daylight press + upgraded refiner 4 ft · continuous press ≈ 30 m
150,000 500 m³/day 4 ft · 25-daylight press, or 8 ft · 15-daylight 4 ft · continuous press ≈ 36 m
200,000 667 m³/day 8 ft · 20–25-daylight multi-opening press 4 ft · continuous press ≈ 40 m
300,000 1,000 m³/day Continuous solution recommended 4 ft · ≈ 45 m high-speed continuous line
400,000 1,333 m³/day Continuous solution recommended Two continuous lines in parallel, or extra-large line
500,000 1,667 m³/day Continuous solution recommended Two large continuous lines in parallel

2.2 Multi-Opening vs. Continuous Press — Comparison

Refiner Medium Density Fiberboard Prodcution Line

Item Multi-Opening Hot Press Line Continuous Press Line
Best capacity range 50,000–200,000 m³/yr 100,000–500,000 m³/yr, first choice for high output
Investment Lower Higher; superior quality and yield
Board quality Thickness tolerance ±0.3 mm; larger sanding allowance Thickness tolerance ±0.1–0.15 mm; controllable density profile, smaller sanding allowance, higher yield
Fiber & resin Conventional blender Blow-line resin application available; lower resin consumption, better mixing
Flexibility Easy thickness changeover Seamless online thickness adjustment for mass production
Automation Automatic loading/unloading; batch Fully continuous with inline weighing/thickness closed loop

2.3 Equipment List by Section (Multi-Opening / Continuous)

Section Multi-Opening Line Continuous Line Function
① Preparation & washing Drum chipper, chip washing machine, screw dewatering, chip silo, metal/stone separation Produce clean chips and protect the refiner
② Thermo-mechanical refining Screw pre-heater / steaming vessel, refiner (main motor sized to capacity), steam release & energy recovery Soften chips and defiberize into pulp fibers
③ Fiber drying Blow-line (flash tube) dryer, cyclone separator, spark detection & extinguishing Dry wet fibers to blending moisture
④ Resin blending High-speed dry blender High-speed blender or blow-line application system Blend fibers with UF/PF/MDI resin uniformly
⑤ Forming Vacuum + mechanical forming station, mat cut-off saw Continuous forming heads, inline weighing & thickness scanner Form uniform fiber mat, control density profile
⑥ Pre-pressing Mat pre-press (standard) Continuous roller pre-press Consolidate mat and remove air
⑦ Hot pressing Multi-opening hot press + automatic loading/unloading Continuous hot press (steel belt + thermal oil + closed-loop thickness) Cure and set the fiberboard
⑧ Cooling & trimming Floor cooler, edge-trimming and cut-to-length saws Cool, de-gas and trim panels
⑨ Sanding & stacking Multi-head wide-belt sander (essential for MDF), intermediate bin, automatic stacking & packing Fine sanding, grading, stacking and warehousing

3. Oriented Strand Board (OSB) Production Line

Using fast-growing plantation wood (poplar, pine, eucalyptus, etc.), the line cuts long, oriented strands, dries and screens them, applies resin by layer, and forms the mat with mechanical orienters — surface strands lengthwise, core strands crosswise — then hot-presses the board. OSB offers high strength, superior nail-holding and moisture resistance, widely used in timber-frame construction, sheathing, packaging and container flooring.

Obs Production Line

OSB Paving Forming Renderings



3.1 Capacity Configuration Table

Capacity (m³/yr) Daily Output (approx.) Multi-Opening Hot Press Line · Typical Config. Continuous Press Line · Typical Config.
50,000 167 m³/day 4 ft · 15-daylight multi-opening press 4 ft · continuous press ≈ 24 m
100,000 333 m³/day 4 ft · 20-daylight multi-opening press 4 ft · continuous press ≈ 30 m
150,000 500 m³/day 8 ft · 15–20-daylight multi-opening press 4 ft · continuous press ≈ 36 m
200,000 667 m³/day 8 ft · 20–25-daylight multi-opening press 4 ft · continuous press ≈ 40 m
300,000 1,000 m³/day Continuous solution recommended 4 ft · ≈ 45 m high-speed continuous line
400,000 1,333 m³/day Continuous solution recommended Two continuous lines in parallel, or extra-large line
500,000 1,667 m³/day Continuous solution recommended Two large continuous lines in parallel

Resin options: phenolic (PF, exterior grade), MDI (formaldehyde-free) or modified UF, configured by end use (interior / exterior).

3.2 Multi-Opening vs. Continuous Press — Comparison

Item Multi-Opening Hot Press Line Continuous Press Line
Best capacity range 50,000–200,000 m³/yr 100,000–500,000 m³/yr, first choice for high output
Orientation stability Good orientation consistency during batch dwell Continuous forming + pressing gives the most consistent orientation and density profile
Board quality Thickness tolerance ±0.3 mm Thickness tolerance ±0.1–0.15 mm; uniform internal bond
Investment Lower Higher
Typical use case Multi-spec, mid-small batches, budget-conscious projects Export-grade stable quality, large-volume supply

3.3 Equipment List by Section (Multi-Opening / Continuous)

Section Multi-Opening Line Continuous Line Function
① Raw material preparation Log/debarked stem conveyor, drum chipper, debarker (optional), chip silo Debark, convey and prepare logs
② Strand preparation Long-wood strand flaker (surface), knife-ring flaker (core), wet strand silo Cut strands to specified length/width/thickness
③ Drying Single-pass drum dryer (zoned temperature), spark detection & extinguishing, dry strand silo Dry strands to 3–6% moisture
④ Screening Trommel screen, air classifier, oversize re-processing loop Separate surface/core strand fractions
⑤ Resin blending Rotary drum blenders (surface & core separate), resin metering & dosing (PF/MDI/UF) Uniform low-resin coating (OSB resin load far below PB)
⑥ Oriented forming Orienting stations (surface lengthwise, core crosswise mechanical orienters), mat cut-off saw Continuous oriented forming line (longitudinal/crosswise orienting heads) Build the oriented surface-parallel / core-cross structure
⑦ Pre-pressing Mat pre-press Continuous roller pre-press Retain orientation, consolidate the mat
⑧ Hot pressing Multi-opening hot press + automatic loading/unloading Continuous hot press (steel belt + thermal-oil closed loop) Cure and set the OSB panel
⑨ Cooling & trimming Floor cooler, edge-trimming and cut-to-length saws Cool, de-gas and cut panels to size
⑩ Grading & stacking Grading station (optional light sanding), automatic stacker, packing line Grade by standard, stack, pack and warehouse

4. Plywood Production Line

Plywood is built from rotary-peeled veneers that are dried, glue-spread, layed up and hot-pressed into multi-layer panels. Large format, minimal distortion and high strength make plywood ideal for furniture, interior decoration, concrete formwork, packaging and vehicle/marine applications. Standard size 1220 × 2440 mm (4 × 8 ft); larger 5 × 10 ft options available.

Press-type note: Plywood is a veneer lay-up process, and the proven industry configuration is the multi-opening hot press line (with optional automatic loaders). Continuous presses are designed for continuous mat forming of PB/MDF/OSB and are not applicable to plywood. For higher capacity we recommend several multi-opening lines in parallel, or a single-opening large-format press; for overlaid panels (melamine paper, veneer facing), a short-cycle overlay press line can be added.

Plywood From MINGHUNG wood based panel production line

4.1 Capacity Configuration Table

Capacity (m³/yr) Daily Output (approx.) Multi-Opening Hot Press Line · Typical Config. Recommendation for Higher Output
50,000 167 m³/day 4 ft · 15-daylight multi-opening press Single line sufficient
100,000 333 m³/day 4 ft · 20-daylight multi-opening press Single line, or two 15-daylight lines in parallel
150,000 500 m³/day 4 ft · 25-daylight press, or 8 ft · 15-daylight Two multi-opening lines in parallel
200,000 667 m³/day 8 ft · 20–25-daylight multi-opening press Two multi-opening lines in parallel
300,000 1,000 m³/day 8 ft · 25-daylight press × 2 lines Multiple lines + centralized glue kitchen
400,000 1,333 m³/day Multi-line parallel solution Three or more multi-opening lines in parallel
500,000 1,667 m³/day Multi-line parallel solution Plant-wide multi-line planning (centralized peeling & drying)

4.2 Equipment List by Section

Section Main Equipment Function
① Log preparation Log cross-cut saw, debarker, steaming vat (hot water/steam), log conveyor Cut to length, debark and soften logs for peeling
② Veneer peeling Log centering machine, veneer lathe (4 ft / 8 ft), clipper, waste core conveyor Peel uniform-thickness veneer continuously and clip to size
③ Veneer drying Roller / mesh-belt veneer dryer, inline moisture meter, in/out conveyors Dry veneer to gluing moisture (8–12%)
④ Veneer processing Grading table, patching machine (plug press), veneer jointing/edge-gluing machine, trimming Grade veneer, repair defects and joint strips
⑤ Glue spreading & lay-up Four-roll glue spreader, lay-up conveyor line, cold pre-press Spread glue, lay up in odd symmetric plies, pre-press
⑥ Hot pressing Multi-opening hot press (15–25 daylight, optional) + automatic loader/unloader; thermal oil / steam / hot water heating Cure the glue lines and form the panel
⑦ Cooling & trimming Panel cooling racks (natural/forced air), crosscut and edge-trimming saws Cool panels and trim to final size
⑧ Planning / sanding Veneer-core planner (traditional) or wide-belt sander (recommended) Surface treatment for uniform thickness and finish
⑨ Grading & packing Grading station, automatic stacker, packing machine, warehouse conveyor Grade by national or customer standard, pack and store

Extensions available: centralized veneer peeling-drying supply line, short-cycle overlay press line, blockboard (finger-jointed core) line — all integrable into a plant-wide solution.

5. Complete-Line Services

  • Engineering: capacity calculation, process flow diagrams and equipment layout based on your raw material, site, budget and target market

  • Supply: complete equipment package with electrical control (PLC/DCS), dust collection and fire-safety systems (spark detection & extinguishing)

  • Installation: on-site installation, single-machine and line commissioning, capacity and quality acceptance

  • Training & after-sales: operation and maintenance training, spare parts supply, process optimization and upgrade support


Get a Detailed Proposal & Quotation

Please share: target capacity (m³/yr) · line type · raw material situation · panel specifications and target market. We will prepare a comparative proposal (multi-opening vs. continuous) with ROI analysis.


Contact Us WhatsApp: +8618769900191  +8615589105786 +8619953900191  +8619953910191 

Email: minghungmachinery@gmail.com 


Inquire
Is committed to providing global customers with intelligent, efficient, and green overall solutions for panel production.

Quick Link

Product Category

Contact Us

WhatsApp: +8618769900191 
Skype: +86-15805493072
Address: New Materials Technology Industrial Cluster Zone of Zhutian Town, Feixian County, Linyi City,Shandong Province China
Copyright ©  2025 Shandong MINGHUNG OSB&MDF Machinery Equipment Manufacturing Co., Ltd. All Rights Reserved.